cidbcareline 01 
cidb careline clickv2 01

In accordance with Act 520, CIDB Malaysia is entrusted to regulate compliance with work and construction materials standards as well as promote and promote quality assurance in the construction industry. In order to archive the functionality, we need reference as a guideline, and this is why CIDB developed the Construction Industry Standard (CIS). The formation of the CIS encompasses a wide range of stakeholders, especially industrial property trustees and experts. Since 1998, 21 CISs have been published.

CIS 1: 1998 National Housing Standard for Low Cost Housing - One and Two Levels Display

CIS1 000
*Bahasa Melayu version only

Standard have been replaced with CIS 26:2019

This standard was provided by the National Housing Standard Working Group for Low Cost One and Two Housing established by the Housing Technical Committee. 

CIS 2: 1998 National Housing Standard for Low Cost Housing - Flats Display

CIS2 000
*Bahasa Melayu version only

Standard have been replaced with CIS 26:2019

This standard was provided by the National Housing Standard Working Group for Low Cost Real Estate Housing.

CIS 3: 2005 National Housing Standard for Medium-Low Cost Housing other than Flats Display

CIS 3
*Bahasa Melayu version only

Standard have been replaced with CIS 26:2019

These standards have been provided by the National Housing Standards Technical Committee and the preparation of these standards is in accordance with the One and Two-Level Low Cost Housing Guidelines (except flats) issued by the Ministry of Housing and Local Government.

CIS 4: 2005 National Housing Standard for Medium-Low Cost Flats Display

cis4 2015 cover 
*Bahasa Melayu version only

Standard have been replaced with CIS 26:2019

This standard has been provided by the National Housing Standard Technical Committee and the preparation of this standard is in accordance with the Medium-Low Cost Flats Guidelines issued by the Ministry of Housing and Local Government.

CIS 5:2018 Quality Assurance For Prefabricated Timber Truss Systems Display
CIS 5 2004 Cover 1
*Bahasa Inggeris version only

The main objective of developing this quality assurance is to establish a detailed and systematic framework for ensuring prefabricated timber trusses supplied to project sites are of a consistent standard of product quality and the establishment of a common standard of acceptance for all the relevant parties involved in the construction of roofs using these trusses (including project consultants and authorities).

CIS 6:2005 Quality Assurance For Treatment Of Timber Roof Trusses With Copper-Chrome-Arsenic Preservatives Display

CIS 6 2005 000
*Hanya versi Bahasa Inggeris

Standard Digugurkan Dan Tiada Gantian

This CIS 6 incorporates the requirements for both the internal and external audit of all stages of the wood treatment activities confined within the wood treatment company and the resulting quality treatment certification conforming to this document.

CIS 7:2014 Quality Assessment System For Building Construction Work (QLASSIC) Display
CIS 7
*Bahasa Inggeris version only

The CIS 7: 2014 on quality assessment system for building construction work adopts several components with reference to CONQUAS 21-The BCA Construction Quality Assessment System (Sixth Edition 2005): Building and Construction Authority, Singapore, it is also dependent on new or update information and development concerning this subject area made available through this Technical Committee.

CIS 8:2007 Design Guide On Precast Concrete Hollow Core Slab Display
cis8 2007 cover
*Bahasa Inggeris version only

This Design Guideline's intended to assist construction industries in the use of Hollow Core Slab as one of IBS Components by providing guidelines for professionals and practitioners to refer to. It covers the followings:

  • Design and durability of Precast Hollow Core Slabs
  • Example of Design Calculations
CIS 9:2008 Guidelines On Handling, Transportation, Stacking And Installation Of Precast Concrete Components Display
CIS 9 2008 001
*Bahasa Inggeris version only

The main objective of developing this guideline is to establish a detail and systematic framework for:

a) ensuring precast elements supplied to project sites are handled orderly with a recommended and systematic procedures;

b) establishment of a common standard of acceptance for all the relevant parties involved in precast elements; and

c) setting the minimum specification to be used by the manufacturers, contractors etc.

CIS 10:2018 Safety And Health Assessment System In Construction (SHASSIC) Display
CIS10 001
*Bahasa Inggeris version only

Safety and Health Assessment System in Construction Industry, or better known as SHASSIC, was developed in 2008 as Construction Industry Standard (CIS 10:2008). This standard was revised to provide clearer in assessing their safety and health performance at construction sites. The standard provide guidance to assessors and contractorsto assess and evaluate the safety and health performance of a contractor in construction works / projects. The assessment shall cover 25% to 75% of a project’s physical progress and shall be inclusive of construction planning stage and construction stage.

CIS 11:2008 Design Guide On Precast Concrete Frame With Moment Connection Display
cis11 cover
*Bahasa Inggeris version only

The objective of this design guide is t disseminate knowledge and subsequently, to promote the use of precast concrete frames through education. Hopefully, by having such design information will encourage more professionals to participate in this prefabricated component based construction.

CIS 12:2009 Quality Assurance For Prefabricated Light Weight Steel Roof Truss Display
cis12 cover
*Bahasa Inggeris version only

This CIS on quality assurance for prefabricated lightweight steel roof truss system referred from existing Malaysia manufacturer's on method statement.

CIS 13:2009 Guidelines On Handling, Transportation, Stacking And Installation Of Structural Steel Display
cis13 cover
* Bahasa Inggeris version only

This CIS is based on existing Malaysian manufacturer's method of statement with the main objective is to establish a detail and systematic framework for ensuring structural steel supplied to the project sites are handled orderly.

CIS 14:2019 Guidelines On Construction Works At Night Display
CIS 14 2019
*Bahasa Inggeris version only

The CIS 14: 2019 Guidelines on Construction Activities at Night was developed in 2009 as Construction Industry Standard (CIS 14:2009). This standard was revised and now known as CIS 14:2019. This guideline is intended as a useful tool for all those working at night and dark environments in the construction industry – providing everyone involved with useful practical information and solutions so they can create and maintain a safe working environment.

This guideline summarizes some key aspects specifically for construction activities at night. The intention put upon this guideline is to be the guidance and for the compliance of a law requirement that has been sta te in Occupational Safety and Health Act (OSHA) 1994 and Factories and Machineries – Building Operations an d Works of Engineering Constructions (BOWEC) 1986, and other related laws – encouraging the highest possible level of health and safety when working in a construction site at night.

CIS 15:2019 Guidelines On Prevention Of Fall At Construction Site Display
CIS 15 2009 000
*Bahasa Inggeris version only

The CIS 15:2019 Guidelines on Prevention of Fall at Construction Site was develop in 2009 as Construction Industry Standard (CIS 15:2009). This standard was revised 10 years later and now known as CIS 15:2019. The revision was carried out by a Technical Committee formed by CIDB, represented by the construction industry stakeholders.

 

References were made to several documents generally used by industry players in managing construction safety and health. This revised version of Guidelines on Prevention of Fall at Construction Site is expected to provide clearer guidance to clients, designer, contractor and workers in assessing their safety and health performance at construction sites.

CIS 16:2019 Guidelines For Works At Confined Space In Construction Site Display
CIS 16 2019
*Bahasa Inggeris version only

The CIS 16: 2019 This guideline applies to the Main Contractor, Employer, Sub Contractor and all construction site administrative personnel who manage and enter a confined space at construction sites, but it does not apply to underground mining or to work in a space at other than atmospheric pressure.

For the purpose of this guideline, a person whose upper body and/or head is/are within a confined space is considered to have entered the confined space.

CIS 17:2010 Guidelines For Working At Noisy And Dusty Areas In Construction Site Display
cis17 cover
*Bahasa Inggeris version only

This document may be cited as the Guidelines for Working in Noisy and Dusty Areas in Construction Site. This document is intended to provide guidance to building contractors in protecting their employees in a construction site from noise and dust hazards. This Guideline will assist the contractors, employers and all construction site administrative personnel to better understand the safety and health hazards that may arise from noisy and dusty working environment.

CIS 18:2018 Manual For IBS Content Scoring System (IBS Score) Display
CIS18 000
*Bahasa Inggeris version only

The IBS Content Scoring System (IBS Score) is systematic and structured assessment system that can be used to measure the usage of IBS in a consistent way. It is intended to be a guide for those who are interested in measuring the content of IBS in any building project. The IBS Score can be used, for any purpose, be it for satisfying the regulatory requirement and also for satisfying the requirement of any incentives program.

CIS 19:2011 QLASSIC For Roadworks Display
19 Cover 1
*Hanya versi Bahasa Inggeris

Quality Assessment System for Completed Road Works is an independent method to assess and evaluate the quality of workmanship of newly completed road works based on this standard.

CIS 20: 2013 IBS Status Manufacturer (AIS) Display
20 Cover 1
*Bahasa Melayu version only

The standard is withdrawn and replace with CIS 24:2018

This manual is issued as a guide for the evaluation process for IBS component product manufacturers. AIS Validation Evaluation and Certification allows manufacturers, developers, local authorities and construction industry players to obtain quality IBS product certification and meet the standards. Each production process for IBS component products will be evaluated in detail and approved before the AIS Production Certification is certified by the authority to eligible applicants.

CIS 21:2018 Ready-mixed Concrete: Production, Conformity, Transportation and Delivery Criteria for Producers Display
CIS 21 01
*Bahasa Inggeris version only

This standard is developed specifically for ready-mixed concrete as a basis for ready-mixed concrete producers in ensuring that their ready-mixed concrete plant, production and production control, transportation and delivery are certified independently by a certification body recognised by CIDB.

CIS 22:2017 Safe Use of Scaffolding in Construction Display
CIS 22 01
*Bahasa Inggeris version only

This CIS focuses on the methods of safe use of scaffolding in construction, which addresses the applicable requirements under the Factories And Machinery Act 1967 (Building Operations And Works Of Engineering Construction - BOWEC) (Safety) Regulation 1986, the CIDB Act 520 (Amendment 2011) and the Malaysian Standards MS 1462 on scaffolding. This CIS also highlights the professional responsibilities of the Professional Engineer for Temporary Works (PETW) on the design and supervision of the scaffolding works under the PETW responsibility and also the responsibility the Designated Person of the contractor in the, procurement, erection, maintenance, alteration and dismantling of the scaffolding.

CIS 23:2018 Safe Use Of Falsework And Formwork In Construction Display
CIS 22 01
*Bahasa Inggeris version only

This CIS provides guidance for the safe use of falsework and formwork in construction, which addresses the applicable requirements of the Occupational Safety and Health Act 1994 (Act 514), Factories And Machinery Act 1967 (Building Operations and Works of Engineering Construction - BOWEC) (Safety) Regulations 1986, CIDB Act 520 (Amendment 2011), Board of Engineers Guideline No. 001 and BS 5975:2008 + A1:2011 (Code of Practice for temporary works procedures and the permissible stress design of falsework).

This CIS also highlights the professional responsibilities of the Professional Engineer for Temporary Works (PETW) on design and supervision of the falsework and formwork, as well as the responsibility the Designated Person under the contractor in procurement, erection, inspection, maintenance, alteration and dismantling of the falsework and formwork.

CIS 24:2018 IBS Manufacturer & Product Assessment & Certification (IMPACT) Display
CIS 26:2019
*Bahasa Melayu version only

CIS 24 (IBS Manufacturer & Product Assessment & Certification (IMPACT)) ini adalah satu kaedah penilaian pensijilan yang sistematik bagi memberi pengiktirafan kepada pengeluar komponen IBS. Standard ini akan menjadi panduan kepada penggiat industri untuk mengukur prestasi pengeluar dan kualiti komponen berdasarkan kepada kriteria yang ditetapkan dalam CIS 24 ini.

CIS 25:2018 Construction Activities Risk Assessment (CARA) Hazard Identification, Risk Analysis and Risk Control (HIRARC) Display
CIS 26:2019
*Bahasa Inggeris version only

The purpose of this Construction Activities Risk Assessment (CARA) using Hazard Identification, Risk Analysis and Risk Control (HIRARC) is to establish the minimum requirements and duties for implementing CARA in Malaysia, and provide guidance on its implementation.

The purpose of this CIS is to provide a systematic and objective approach to identify hazard and analyse their associated risks for construction work activities. It is one of the general duties as prescribed under the Occupational Safety and Health Act 1994 (Act 514) for the employer to provide workplaces that free from safety and health risks to their employees and other related person.

CIS 26:2019 National Housing Standard  Display
CIS 26:2019
* Bahasa Melayu version only

The National Housing Industry Standards are updated from the National Housing Standards published in 1998 and 2005. The process of updating these standards has involved many stakeholders in the construction industry, both government and private. The parties included representatives from ministries, government departments, state governments, local authorities, professional bodies, construction associations and academics. Generally, these standards provide minimum standards in providing quality housing in Malaysia. This standard is a guide for those involved in the construction industry in planning, designing and building housing in Malaysia. However, compliance with this standard does not by itself provide any immunity from legal obligations.

CIS 27:2019 Occupational Safety And Health – Specification And Bill Of Quantities (BQ) For Construction Works Display
CIS 27:2019
*Bahasa Inggeris version only

This CIS 27: 2019 Occupational Safety and Health : Specification and Bill of Quantities (BQ) for Construction Works adopt several components with reference to Occupational Safety and Health Act and Regulations (OSHA 1994), Factories and Machinery Act and Regulations (FMA 1967), Construction Industry Development Board Act 520, CIS 15: 2019 Guidelines of Prevention of Fall at Constructions Site, Guideline for Public Safety and Health at Construction Sites 2007 etc. The Specification and Bill Quantities (BQ) proposed in this CIS 27 : 2019 may be adopted in total or in part and addition/ omission may be effected to suit the project needs.

KOD QR

iso 01iso 02

iso 03iso 04