cidb careline v1 01 
cidb careline clickv2 01

IMPORTED MATERIALS ANNOUNCEMENT In accordance with the Certificate of Approval (COA) procedures and conditions, under the Customs (Prohibition On Import), any product / building materials that is intended to be brought into the country must obtain Product Certification or pass the Full Type Test Report (FTTR ) from producer countries BEFORE ENTERING THIS COUNTRY.

 

Effective 30 April 2014 (Bill of Lading Date) any product that has arrived at the country entrance without having one of the above documents, the CoA application will not be processed by CIDB. Importers must bear any implications arising out of breach of these terms.

 

However, based on the existing policy set by MITI, the products below are given flexibility in which the product can undergo testing upon reaching the Country :-

 

i) Iron & Steel (below 250 mt)
ii) Float Glass, Fiber Cement Flat Sheet, Insulation Material and Radient Barrier (from 31 January 2014 till 31 Mar 2014 only).

 

Application for Certificate of Approval(COA)

The program is part of the Customs Act (Prohibition on Import) 1988 Amendment 2003/2004 to ensure the quality of imported construction products. The construction materials listed in the Customs Act must have a Certificate of Approval (COA) from CIDB before materials can be imported into Malaysia. The need to obtain COA is based on the requirements of Malaysia Standard (MS).

 

For further information, visit the following links:

The below construction materials needs COA verification by CIDB :

NO PRODUCTS AND MATERIALS STANDARD HS CODE
 1

 Ceramic Products

Ceramic Tile

Ceramic Pipe and Pipe Fittings

 

MS ISO 13006

 MS 1061, PART 1:1999

 

6907.10 100, 6907.90 100

6906.00 000

 2  Cleaning Equipment (Ceramic & Plastic) MS 147/ MS 1522/ MS 795

6010.10 900, 6010.10 200,
3922.90 110

 3

3.1

Iron and Steel Products

Coil of carbon steel, strip and hot rolled plate (Width ≥ 600mm)
Hot rolled plate Boxed, coils

 

 

 

Hot rolled plate Boxed plate Hot rolled plate Boxed plate

 

Hot Rolled Steel Plates
above 10mm thickness
4.75mm thickness or more, but less than 10mm thickness

 

 

3mm thickness or more, but less than 4.75mm thickness


Not exceeding 3mm of thickness:
Contains by weight of less than 0.6% of carbon
For other construction purposes

 

 

+ New MS (P) Std
for chequred
MS EN 10025


+ New MS (P) Std
for chequred
MS EN 10025

 

MS 1768

HR Carbon Steel for pipes and tubes

 

 

MS 1705

MS EN 10025 Part 2
Non Alloy Structured Steel

 

 

7208.10.xxx

 

 

7208.40.xxx

 

 

7208.51.xxx

7208.52.xxx

 

 

7208.53.xxx

 

7208.54.xxx

3.2

Coils and hot rolled plate

Carbon steel coils, strips and hot rolled plate (Width ≥ 600mm) plated or coated

More than 10mm thickness

4.75mm thickness or more, but lesss than 10mm in thickness
3mm thickness or more, but less than 4.75mm in thickness
3mm thickness or less:
Contains by weight of less than 0.6% carbon

Electrolysis coating or zinc coating
Contains by weight of less than 0.6% carbon:
Coils and strips thickness not exceeding 1.5mm

Hot dip zinc coated sheets
At least dipped or coated with zinc:
Contains by weight of less than 0.6% carbon
Coils and strips thikness not exceeding 1.5mm

Plated alloy or aluminium-zinc coating
Contains by weight of less than 0.6% carbon
Not exceeding 1.5mm in thickness
Painted coils and strips before colour coating

Painted,varnished or coated with plastic

 

Contains by weight of less than 0.6% carbon

Not exceeding 1.5mm in thickness
Electrolytically plated or coated with zinc:Containing by weight less than 0.6% of carbon: (Coil Width < 600mm)

Hoop and strip thickness not exceeding 1.5 mm

 

Hot Dip Zinc Coated Sheet and Coils
Otherwise Plated or Coated with zinc:Containing by weight less than 0.6% of carbon: (Coil Width < 600mm)
Hoop and strip thickness not exceeding 1.5 mm

Painted, varnished or coated with plastics: (Coil Width <600mm)

Containing by weight less than 0.6% of carbon: (Coil Width < 600mm)

 

 

Hoop and strip
Not exceeding 1.5 mm in thickness
Otherwise Plated or Coated sheets and coils (Coil Width < 600mm)
Containing by weight less than 0.6% of carbon:
Hoop and strip thickness not exceeding 1.5 mm

 

MS 1768

MS EN 10025

MS 1705

 

 

MS 2543*

 

MS 2500

MS 2384*
MS 2385*

MS 2500

MS 1196*
JIS G3317*
MS 2500

MS 2383*
(MS 2384 MS 2385)

JIS G3318*
(JIS G3317)

 

 

MS 2543*

 

MS 2500

 

MS 2384*

 

MS 2385*

MS 2500

 

 

MS 1196*
MS 2500

 

 

 

 

7208.51.xxx
7208.52.xxx
7208.53.xxx

7208.54.xxx

 

7210.30.xxx

7210.41.xxx

 

7210.49.xxx

 

7210.61.xxx
7326.90.500
7326.90.900

 

7210.70.xxx

 

 

 

7212.20.xxx

 

7326.90.500 

7326.90.900

 

 

7212.30.xxx
7326.90.500
7326.90.900

7212.40.xxx

7326.90.500
7326.90.900
7212.50.xxx

 

 3.3

Iron and Steel Products (Pipe & Tube)

Seamless Steel Pipe


The pipeline of the type used for oil or gas pipelines
other construction purposes
Welded pipes, with outer diameter exceeding 406.4mm


The pipeline of the type used for oil or gas pipelines:
Oblong shaped welded sunken arc
Others, Welded in oblong shape

 

 

Others, Welding
Casing used in oil or gas drilling
Others, welding

Welding  oblong shaped

Paip & Welded carbon steel tube
Others, welding, uncircular cross section
Others, welding, circular cross section (Non alloy iron or steel)
Others, welding, circular cross section (other steel alloys)
Others, welded uncircular cross section:
Cross section of rectangle

Other uncircular cross section
Other construction purposes

 

 

 

 

 

Bridges and bridge parts
Scaffolding


Tower and lattice masts


Tube for scaffolding and accesories
Guardrail

 

MS ISO 3183


API 5CT


MS ISO 3183


MS 1968
API 5L
API 5CT
MS ISO 3183
MS 1968

SPAN TS 21827 Part 1
SPAN TS 21827 Part 2
API 5L
API 5CT
BS EN 10219

MS 275
MS 863
MS1862
MS 1968
MS 1462-1
MS 1462-2-1

MS 862
MS 2381
MS 2376
MS ISO 3183
BS EN 10219
JIS G3350

API 5L
API 5CT

 

MS 1462-1
MS 1462-2-1


MS 1862
EN 39


JIS G3444
JIS G3350
AAST

 

 

 

7304.10.xxx

 

7305.11.xxx
7305.12.xxx
7305.19.xxx

 

 

7305.20.xxx

7305.39.xxx
7305.90.xxx

 

7306.30.xxx
7306.50.xxx

 

7306.61.xxx
7306.69.xxx
7306.90.xxx

 

 

 

 

 

 

 

 

7308.10.xxx

7308.20.xxx7308.40.xxx

 

3.4

Iron and Steel Products (Others)

Shapes and parts
- Pile sheets
- Angled, shapes and parts


- Rails

 

 

Tiub, paip dan profil berongga, dibuat daripada besi tuang
Tiub, paip dan profil berongga, dibuat daripada besi tuang
Daripada besi tuang yang mudah dibentuk
Penutup lurang ("Manhole covers"), parutan dan bingkai dibuat daripadanya


- Lain-lain
Penutup lurang ("Manhole covers"), parutan dan bingkai dibuat daripadanya

 

MS 2025-1

MS 2025-2
MS EN 10025

 

AS 1085-1&2
JIS E 1103


DIN 536

MS1919
BS EN 598:2007

BS EN 124:1994

 

 

 

7301.10.xxx
7301.20.xxx

 

 

7302.10.xxx
7302.40.xxx
7302.90.xxx
7303.00.xxx

7325.10.xxx

 

 

7325.99.xxx

3.5

Rod wayar, jeriji ("Bar") & wayar


Keluli untuk Pengukuhan Konkrit (Cacat/Diindenkan - gelung)

 

Rod dawai keluli


Bar bulat dalam gegelung

 

 

 


Wayar, benang dan tali

Jaringan wayar


Gril, jejaring dan pagar, dikimpal di persimpangan, daripada wayar dengan dimensi keratan rentas maksimum 3mm atau lebih dan mempunyai saiz jaring 100 cm2 atau lebih

Jeriji

i. Keluli untuk Pengukuhan Konkrit (Jeriji bulat - lurus)
ii. Produk gelekan panas untuk keluli struktur (Jeriji rata)
iii. Keluli untuk Pengukuhan Konkrit (Cacat/Diindenkan - lurus)
Sudut sama ("Equal Angle")
Bahagian-bahagian L atau T - tidak diubahsuai selain gelekan panas, tarikan panas atau tersemperit - yang berketinggian kurang daripada 80mm:
struktur
Bahagian-bahagian L atau T - tidak diubahsuai selain gelekan panas, tarikan panas atau tersemperit - yang berketinggian kurang daripada 80mm

 

 

MS 146 (Public Comment)
MS 144(PC)
MS ISO 16120 - Part 1,2,3,4

MS 144 (PC)

 

MS1138-2
MS 1138-3
MS ISO 2408
MS ISO 4344
MS 1138-4

MS 145(PC)

 

 

 

MS 144 (PC)
MS EN 10025
MS 146 (PC)

MS EN 10025

 

 

7213.10.xxx

 

7213.91.xxx/ 7213.99.xxx

7213.91.xxx/ 7213.99.xxx

7217.10.xxx

7312.10.xxx
7228.60.xxx
7312.10.xxx

7314.20.xxx

 

 

 

7214.20.910
7214.20.990
7214.20.xxx


7216.21.xxx

 

7216.40.xxx

3.6

Paip keluli tahan karat yang dikimpal


Lancar, dikimpal dan sejuk berat - jenis ferritic dan austenitic
Paip dan tiub keluli tahan karat untuk tujuan pembinaan lain


Tiub keluli tahan karat jenis austenitic dikimpal, untuk mengangkut
air dan cecair lain - Syarat Penghantaran Teknikal

 

MS 1841

ASTM A554

MS1988
JIS G 3448

 

 

 

7306.11.xxx
7306.19.xxx
7306.21.xxx
7306.40.xxx

7306.40.xxx

4

*Lembaran rata simen gentian, tidak mengandungi asbestos
Bahan bumbung, permukaan, lantai kunci dan dinding jubin sesekat ("partition") yang mengandungi siling plastik & lain-lain

 

MS 1296

 

6811.82 100
6811.82 200
6811.82 900

 

5

Simen
a)Simen Portland
i.Simen Portland putih, pelbagai jenis
ii. Simen Portland lain
b)Simen Hidraulik


i.Simen beraluminium
ii. Simen hidraulik lain

 

MS 898
MS EN197

 

2523.21 000
2523.29 100. 2523.29 900.
2523.30 000


2523.90 000
2523.90 000

6

*Bahan penebatan

Bulu sanga, bulu berbatu & bulu bergalian
Gentian kaca

 

MS 1020
MS 1020

 

 

6806.10 000
7019.90 100

7 Penghalang penyinaran (penebat kerajang haba)  MS 2095  7607.20 100
8

*Kaca Pengapungan

Kaca Cerah
Kaca Gelap
Kaca pencerminan
Kaca berwayar

 

MS 1135
MS 1135
MS 2397
MS 1498

 

7005.29 900
7005.21 900
7005.10 900
7005.30 000

9

Aluminum
Kepingan, helaian dan jalur aluminium, dan lain-lain

 


(contoh: aluminium komposit)
Kerajang aluminium ketebalan 0.2mm dan ke bawah

 

MS 2040: 2007

 

MS 1848 : 2005

 

7606.11 000, 7606.12 000,

7606.91 000, 7606.92 000

7607.11 000

7607.19 000

 

Note: The new enforcement date for new construction materials will be announced later.

Application of COA can be made using the e-Permit form / Q1, and shall be supported by the following documents:

 

  •  A copy of the Product Certificate, or original copy of the consignment report;
  •  One copy of Bill Bill of Lading;
  •  An Invoice and Packing List;
  •   Original receipt of confirmation of payment;
  •   Original confirmation letter from manufacturer / exporter;
  •  Copies of the Companies Commission of Malaysia (SSM) (for first time application); and
  •   A copy of the Mill of Certificate, as per the requirements of the building materials (if needed).

KOD QR

iso 01iso 02

iso 03iso 04